TS300 STACKER

Your reliable, high-speed stacking solution designed to bring efficiency to your specific application.

Home > Wood Processing Equipment > TS300

High speed
stacking solution

AIT’s TS300 Stacker System is capable of stacking boards at over 25 layers per minute. Its versatility in speed and comprehensive array of choices facilitate seamless integration with AIT’s Chamfer Machine, HY Saw, HR Rip Saw, and Notcher, effectively enhancing your operational capabilities. Applicable across a diverse spectrum of sawmill and lumber industry requirements.

Standard Features

9

Included with all TS300 Stackers

Ability for pass-through at 550 feet/minute
Board stacking with or without pallet
Dual operator platforms
Heavy duty machine base
Powered exit conveyor
Programmable automatic 2 tie-strip dropper
Programmable on/off control for upstream equipment
Programmable layer configurations
Recipe storage and recall
Stacks up to 25 layers/minute
Stacks boards 3/8″ to 4″ thick and 24″ to 72″ long

Specifications

Board Sizes	Min	Max	Variations
Board Length	24”	72”	Board length can not vary by more than plus nothing minus ½”.
Board Width*	2”	8”	Board width, including any taper, can not vary by more than plus or minus (board width/3)/number of boards per layer.
Board Thickness*	3/8”	1 ½”	Thickness can not vary more than plus or minus the greater of 10% or 1/16”. This includes cupping.
Tie Strip Thickness	.375”	1 ¼”	Same as board thickness.
Tie Strip Width	1”	5 ½”	NA

(Actual final dimensions depend on model purchased)

*Board thickness cannot exceed ½ of the board width.

Note: Maximum allowable board bow is less than board thickness.

Maximum allowable board wane is 65%.

Note: The TS300 is a precision piece of equipment, if the material being run is inconsistent in size or of poor quality, then jams can and will occur and through put will be reduced.

Stack Sizes	Min.	Max.
Stack Height	–	60 in.
Stack Width	36 in.	48 in.
Stack Length	24 in.	72 in.

Machine Size	Length	Width	Height	Estimated Weight (lbs)
Basic Stacker	13 ft. – 6 in.(3)	7 ft. – 11 in.	7 ft. – 7 in.	4620
Side Exit	–	+ 9 ft.(1) (2)	–	1320
Auto Tie Strip	–	–	+ 2 ft – 1 in.	300
TS300 Unscrambler	+ 8 ft.-5 in.	–	–	1500
Pallet Feeder	+ 4 ft. – 4 in.(1)	+ 5 ft – 4 in.(1)	–	1015

Other Options Include

Extended infeed arms
Full layer tie-strip feeder (CHEP Standard)
Manual or automatic pallet feeder
Programmable automatic 4-tie-strip dropper
Spare Parts

DISCLAIMER: INFORMATION ACCURACY

The details and specifications on this page are subject to change. While we aim to provide accurate information, discrepancies may arise. Please verify all specifications with our team before making decisions. We are not liable for any losses from such discrepancies.